• Products Details

Dongguan JiaFu Automobile Accessories Co., Ltd. always devotes unlimited efforts to the research and development of products. Technological innovation is an important factor for products to form core competitiveness and maintain competitive advantage. Following scientific and advanced production standards, we have successfully made Ls3 Ls2 6.2l Standalone Harness 4l60e 58x Drive By Wire Dbw Truck Corvette Pedal excellent in its performance. Through multiple times of tests, the Auto supplies, wires, wire products, electronic products, hardware products, plastic parts, molds. is proved to be of great and so on. Before its launch, it has passed the certifications of several international and national authorities.

Place of OriginGuangdong, ChinaBrand NameGarfour
Model NumberGF-W-A110ApplicationAutomobile
Product NameLS3 LS2 6.2L STANDALONE HARNESS 4L60E 58XConnector TypeDelphi original
Wire CorecopperWiring Length:13-15 ft (3.96-4.57 m)
Gross Weight:3.4kgConnector:EV6, LS3 injector connectors
Fuse Block:ATO Style Fuse BlockFit:the 15 pin 4L60E Transmission
Voltage:12V 40AWarranty12 months

Products Description


Gen IV Engine (58x) w/ T56/TR6060 Non VVT Standalone Harness

APPLICATION: LS2 58X 6.0 from Corvette and Trailblazer SS, LS3 6.2 , GMPP LS376 480 & 525, LS7 7.0 from Corvette and Camaro ZL1,
Vortec LY6, L92, L76, LMG, 4.8, 5,3, 6.0 and 6.2 ENGINES WITH T56/TR6060 OR NON-ELECTRONIC AUTOMATIC TRANSMISSIONS (TH350, TH400,
POWERGLIDE, 700R4, 200-4R).
PARTS INCLUDED: Complete engine wiring harness, Instruction Manual

* Fuse/Relay Box
* Fuel Pump Control (Relay included)
* Fan controls (Relays available seperately KIT-1010)
* Check Engine Light, Speedo, Tachometer, OBD2 Port
* Accelerator Pedal and Throttle Body
* MAF Sensor
* MAP Sensor
* Engine Coolant Temp Sensor
* Alternator Control
* (2) Oxygen Sensors
* Crank Sensor
* Cam Sensor
* Fuel Injectors
* Coil Packs
* Transmission control
* Knock Sensors

NOTES: These harnesses are designed for retrofitting Gen IV (58x) 4.8 5.3 6.0 and 6.2 engines and T56/TR6060 or non-electronic
automatic transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely
plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with
4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding
grommet seal allows for professional, leak proof installation.
Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature
Wire to GM Specifications. All harnesses are 100% Quality Inspected prior to shipping.


03-07 Chevy, GMC, Cadillac, and hummer Vortec engines with the electronic throttle body and 4L60E transmissions.
Recommend Products


1. Packed with PE waterproof bag, then put into Carton.

Shipping & Delivery
FedEx/DHL/TNT/UPS/EMS/Aramex/SF for samples, Door-to-Door;
By Air or by Sea for batch goods; Airportport receiving;
Customers specifying freight forwarders or negotiable shipping methods!
Delivery Time: 3-7 days for samples; 15-30 days for batch goods.
Company Profile
Dongguan JiaFu Automobile Accessories Co.,Ltd.
is located in Humen town, Dongguan city, Guangdong, China. We are a Chinese leading manufacturer specializing in custom cable wire harness solutions and wiring assembly, especially in Automotive Industry.
Our business started in 2001.we've been keeping a good cooperative relationship with the car manufacturers in the domestic and international market directly or indirectly for years.
 At present, our products consist of custom wire harness assembly, custom design&manufacturing of molds, rubber connectors, and also some other universal auto accessories, such as Switches, Chargers.
It covers about 4600 square meters area in total and there are 300 employees at Jiafu, more than 12 engineers, and also 20 people in our quality inspection team.
As an experienced exporter, our products have been sold to Europe, the America, Middle East, Southeast Asia, Australia and some other countries and areas in past 18 years.
We focus on a series of fashion accessories, a wide range of diversity, reasonable price and on-time delivery.

Any inquiries from you would be highly appreciated!

If you can't find the exact product you need in the pictures, please don't go away. Just contact me freely or send your sample and drawing to us. We will reply you as soon as possible.


IATF 16949


ISO 9001

Our Advantages

We have a complete production department with experienced engineers and workers, wiring assembly is commonly with the help of possible toolings made by our engineers to meet the engineering technical requirements.

Production Display
The wiring kits is assembled by a serious production flow, step by step. such as wire custom cutting, pins crimping, housing assembly and discrete assembly, our automatic equipment make our work with high efficient.

Unallocated Inventory
We have a large series of inventory on hand perennially, including the housing, connectors, terminals and other raw components. so we can guarantee the supply rate.
Quality Inspection Team
We have established independent quality control department, professional quality control personnel, equipped with advanced testing equipment. we strictly control the quality of every procedure in the manufacturing and production process, and strictly abide by requirements of IATF 16949 and ISO 9001 quality managing system to give customer entire satisfaction.

SEMA SHOW Las Vegas 2018

Automechanika Dubai 2019

Automechanika Istanbul 2019

Automechanika Shanghai 2018


Saudi Arabia



Q: What kind of payment terms do you accept? Can I pay by RMB?
A: We accept T/T. Please make sure that we receive the same amount of the Invoice. And you can pay by RMB.


Q: What about your delivery time?
A: Different products and quantities have different procedures and different production time. We promise we will try our best to finish all your orders within the shortest time.


Q: Can you make customized products?
A: Yes. We made a lot of customized products for our customers. And we also made many molds for our customers. 


Q: How do you secure the shipment safety?
A:  We use good quality packing material to ensure the safety of the products. We will be responsible for any products damages which are caused during delivery.


Q: What are the main products of your company?
A: The main products of our company are wire harness, switches, and their molds.


Q: Are you an agent or a manufacturer?
A: We are the manufacturer of our goods.


Q: Where is your company's location? 

A: Our company located in Humen Town, Dongguan City, Guangdong Province, China.

Q: What is your packaging method?
A: Normally we put our articles into a PE bag individually, then pack them in a carton on a specified quantity.

Contact Us
Basic Information
  • Year Established
  • Business Type
  • Country / Region
  • Main Industry
  • Main Products
  • Enterprise Legal Person
  • Total Employees
  • Annual Output Value
  • Export Market
  • Cooperated Customers


Send your inquiry


Get In Touch With Us

The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.


    They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
    They are now widely exporting to 200 countries.


    Send your inquiry

      Choose a different language
      Tiếng Việt
      Current language:English